Monday, July 22, 2013

DIY board and batten

Put this on the list of stuff 36 week pregnant women shouldn't do.... install board and batten in their house.  I have been wanting to do this project for a while now, like months now, and decided this past weekend was the time to give it a go.  I actually just asked someone to price this out for me to just pay him to do it but decided we could at least try it ourselves.  We finally installed the quarter round in the new big bedroom that was missing since the room was completed in what? March??  To do that we needed to borrow my Dad's compressor and nail gun and since it was still in the garage I figured what better time to do this board and batten project.  Also, installing quarter round should also be on the "not for giant pregnant chicks" list.

I read about 5948 Pinterest links to different tutorials and then just decided to go for it.  We went to Home Depot and had the guy strips of MDF in 4 inch( for the top and bottom) and 3 inch( for the up and down pieces).  It was one board of 1/2" MDF so the whole project was under $30 since I already owned all the caulk and paint supplies.  We bought some stupid angle finder thing that didn't work for shit so luckily we had the guy cut us a bunch of extra strips of boards.

And I will stop there with even explaining how we did this because I am no pro.  I will say its not perfect but it looks a million times better than I expected it would with us doing it.  I doubt it would even looks much better if the handiman did it.

Enough words.... picture time....
before and after
13-7-21-swimteam-2.jpg13-7-22-boardbatten-12.jpg

Here is a before and during. 
13-7-21-swimteam-2.jpg13-7-21-swimteam-7.jpg

Before... well actually this was almost a before but we had already pulled off the top piece of moulding.
13-7-21-swimteam-5.jpg

After.... my paint wasn't even dry and I was taking these pictures.  Kinda dark but you get the idea, it was nearly 6pm at this point and I didn't want to wait until tomorrow to take after pics.
13-7-22-boardbatten-15.jpg

A different view....
13-7-22-boardbatten-18.jpg13-7-22-boardbatten-20.jpg

Now just squint and imagine there is a gallery of frames on the wall above the board and batten heading all the way up the stairs... can you see it?!?  I can't decide what kind of frames I want or if I want it orderly or random.  Maybe I should just pay someone to do that part for me, haha.

3 comments:

  1. Consider me mega impressed! It looks AWESOME!

    ReplyDelete
  2. It looks great! What height did you decide on? i have the same stairway and am trying to decide how high above the railing to go?

    ReplyDelete
  3. I just measured and they were 29” high but that’s likely super specific to my setup. I made them just above the railing to cut down on the amount of cuts I would need to make. Hope that helps!!

    ReplyDelete